Products

Slitter Line

製品情報

Slitter Line

With work safety as priority, this Line also focused on simplicity of operation. It can also be made compact to save as much space as possible.Through its new mechanism such as automatic setting of source coil, coil automatic insertion mode, sheet automatic feeding and others, being unmanned, cost is reduced. Also, by installing a non-contact thickness gauge, plate thickness is highly guaranteed.

製品情報

  • 製品情報
    The separator holder for the recoiler is positioned automatically using the AC servo motor and special fingers. Fixing is done by inflating the shaft with an air shaft or a hydraulic shaft.。

    Automatic separator and recoiler

  • 製品情報
    Using four robots for slitter blades and spacers, automatic blade assembly and blade return are performed.

    Automatic blade assembly device

  • 製品情報
    It has a structure that can be retracted to the side of the stand on the operation side and can be docked with a dummy arbor. The arbor shaft is equipped with a pusher device, which can be sent to the dermy arbor device by driving an AC servo motor. The blades and spacers can also be clamped and unclamped by operating the push button using the star clamp device.

    Slitter for automatic blade change

  • 製品情報
    The separator of the pre-tension device also automatically sets the holder using an AC servo motor and a special finger based on the information from the upper level. Fixing is done by inflating the shaft with an air shaft or a hydraulic shaft.

    No, 1 and 2 separator

Product gallery

Blanking Line

製品情報

Blanking Line

Equipped with a feeder lifting device, and a telescope transfer compare on the press outlet side. It is possible to correspond to the “mold height” of various steel sheets. In addition, a belt scratch prevention device is installed on the press output side transport compare. We can meet a wide range of customer needs and achieve high quality and high precision finishes.

製品情報

  • 製品情報
    A device that brushes the surface of steel sheets for automobiles. Spray steel plate cleaning oil and clean with a nylon brush.

    Cleaning equipment

  • 製品情報
    Trappe Zoids shear for press dies The blade is fixed with a hydraulic clamp, and the clearance is adjusted with a manual handle.

    Die Set Trappe Zoids Shah

  • 製品情報
    It is a device that feeds the remaining material that has come out of the feeder roll to a fixed size. It will improve the yield.

    Micro feeder

Product gallery

Rotary Shear Line

製品情報

Rotary Shear Line

Reliability of 4Hi and 6Hi roller levelers, equipment suitable for surface-treated steel sheet materials. By having functionality that does not require a blade fixing bolt, the work is simplified with a boltless clamp type. In addition, a clearance adjustment function is attached to enable sharp cutting.

製品情報

  • 製品情報
    After flattening the coiled steel sheet with a roller leveler, it is continuously cut into a rectangle and trapezoid to make a sheet. The blade is fixed by the hydraulic clamp method, and the clearance adjustment is automatically set electrically.

    Rotary Trappe Zoids Shah

  • 製品情報
    Roller leveler with quick open and replaceable cartridge.

    Roller leveler

  • 製品情報
    After flattening the coiled steel sheet with a roller leveler, it is continuously cut into a rectangle and trapezoid to make a sheet. The blade is fixed by the hydraulic clamp method, and the clearance is adjusted with the manual handle.

    Rotary shear

Product gallery